Global Entertainment, News & reviews

If you are interested in fine-tuning your satellite signal then you can easily do so. All you need to do is go to the signal strength screen. You visited this screen before during the FTA receiver setup. You will need two people for this part of the setup. Now, you will need to make sure the signal is running and then make sure someone is inside and someone is at the dish. The collard on the LNB will need to be loosened by loosening the two screws that keep the collar together. Then, you will need to twist the LNB just a tiny bit. At this point you will want to wait at least five seconds for the receiver to update the reading. If while you are adjusting the signal it gets worse then you will need to move it in the opposite direction. This should not take much time at all and it is probably easier than you think. In fact, it will take less time than it would to find the FTA files. Once you find the satellite signal you desire then you will simply need to tighten the collar by turning the screws and you will be done!